Any homeowner would like their exterior area to be as beautiful and functional as possible. Highlighting special spaces in your property can do wonders. It can be a simple garden, a landscape architecture, or an outdoor space. Fencing can help improve whatever aspect of your home’s exterior.
Building and installing your fence is a project that should be done with great care and planning. Having a top-rated fencing contractor take care of it for you is the best route to take. If you are keen on installing the fence yourself, follow proper fence installation.
Do’s And Don’ts of Proper Fence Installation
Before going into details of the installation, it would be best to go over things that you best remember. Simple do’s and don’ts will help you never forget the basics and necessities of proper fence installation.
The Do’s To Follow
- Do make sure that you have all the materials, parts, and tools that you would need for installation. This will help you save on time and effort.
- Do ensure that the concrete, for the corners and ends, is all set before you go to the monofilament or hanging the fence mesh.
- Do have a level so you can have good plumb posts.
- Do mound any dirt around the posts so you would not have to worry about water pooling in your work area.
- Do have your tools within reach as you work and make sure that they are all in working condition.
- For a more solid base, one important part of how to build a wooden fence step by step is to put gravel or crushed stone to the bottom of the postholes. Take note that if you will be building in heavy clay and rock, you can skip this step.
- Do take care of planning the gate placement as well. Do this before construction to avoid issues with any posts and brace placement.
- Do ensure dry fitting of all parts before any drilling and installation.
- Do start with installing post extensions and post caps before you proceed with the posts.
- Do add at least one zip tie every foot along the line posts.
- If you are trying to keep deer away, make sure to stake the fences to the ground every 5 feet. Deer tend to try going under a fence rather than going over it.
The Don’ts To Follow
- Don’t skip on checking your utility and property line before any construction.
- Don’t rely on estimating post placement. Measure for even spaced fence posts and put marks for post placements before you do any digging.
- Do not attempt to skip any corner bracing. The corner posts will help carry the weight of the fence as it is stretched into two directions. Add bracing in each direction for a secure fence.
- Don’t be sloppy with dumping soil around line posts and then dumping it down with your foot. Add soil in equal increments of 6 inches and tamp it with a wood post or any tamping device before you add the next 6 inches.
- Do not skimp on the depth of the post holes.
- Don’t put the monofilament last. Make sure you put if first before installing the line posts. This will ensure the perfect guideline to place the posts.
- Do not forget to add post caps. Without these, your posts can get water in hollow parts and lead to damage.
Steps to Follow (and Not To Forget!)
Follow these steps as you install your fence.
Step 1: Spacing For Fence Posts
You would need to decide on how far apart your fence posts will be. You can follow the normal six up to eight feet distance between posts. Set corner posts first. Mark positions.
Step 2: Prepare Posts and Holes
Bury 1/3 of the fence post in the ground. Use a post hole digger. Apply wood preservative to the part that will be buried in the ground.
Step 3: Place Posts
Settle gravel or small rocks at the bottom of the posts and then align the posts well. Tamp the ground without disturbing the alignment.
Step 5: Install Fence Boards
For wood fences, adding a fence board helps hold the fence posts better. Nailing them to place is the best option.