Do you want to update the appear of the ceiling in a area in your home? See how I updated our basement ceiling with a whitewashed knotty pine wood plank board. I will acquire you via the Diy wood plank ceiling course of action stage-by-stage.
You can also insert identical character to other regions of your property by including a wood plank accent wall or wood plank wainscoting, a planked kitchen area island structure, or a plank headboard wall.
Many thanks to DAP for sponsoring this article. All views are ours this article may well have affiliate backlinks — see our entire disclosure plan right here.
Diy Whitewashed Wood Plank Ceiling
This ceiling actually reworked the appear of this area in our home. We really like how it turned out. We are wondering of doing this in other rooms in our home but in advance of we do that I required to exam out how we appreciated it in this area in the basement.
We had previously put in new flooring, so now that we have a new basement ceiling, we just have to do every thing in amongst! #youmightbeaRemodelaholic
See the befores of our Jordan home right here and all the jobs for this home right here.
Measurement of Project:
11′ x 14′ (154 square feet) ceiling with aspect drop down. This area is beneath the principal floor of the home in the basement.
Price and Elements:
Regional components keep selling prices
- (4) boxes 8′ very long Knotty Pine Wood V-Plank Boards Kits $54.01/box
- forty one rows at 11′ – 6″
- About 500′ of boards (63 boards, 3.5 box kits)
- Increase 10% additional boards for midsection. 50 % a box labored wonderful for me.
- (one) Gal. White Latex Paint $31
- (10) 10 oz. DAP DYNAGRIP Adhesive $4/10 oz.
- (one) box one one/4″ Pin Nails $10/box
- Complete Cost $261
Video Coming Before long
Continue to be tuned for a video tutorial of this basement ceiling update. Subscribe to our YouTube channel and click the bell to change on the notifications!
Whitewashing and Installation Techniques
one. Whitewash Boards To start with.
This will help save you a large amount of time and headache if you do this 1st. I had greater regulate of the shade when I took the time to whitewash the boards in advance of I put in them.
Dilute the paint of selection with water. I made use of about 75% paint to twenty five% water for this appear. I didn’t want it to be as well white so I wiped it off, with a rag, appropriate after making use of the paint with a brush. Let that dry for a pair of several hours then you can begin installing.
Related Examining: Use this shade washing system to stain wood any shade!
two. Clean the Area.
Wash the ceiling with a soaked rag and some dish soap to get rid of any dirt or dust. This will aid the boards adhere to the ceiling when you glue them in position.
You will also want to get rid of the light fixtures to reinstall after your plank ceiling is put in. We took this prospect to swap the flush-mount “boob lights” with can lights and we really like the change! Additional information about that coming in the video.
Go through additional about installing recessed can lights or see our picks for additional attractive flush-mount fixtures right here.
3. Mark All the Floor Joists or Ceiling Rafters.
In my circumstance, I was in the basement underneath the principal amount of the home, so I uncovered all the floor joists with a stud finder and chalked a line across the area to establish the center of just about every floor joist with a chalk line, so I could nail the boards to the floor joists driving the drywall in the
I have noticed and researched other solutions to installing boards on the ceiling, but I resolved that just nailing and gluing to the ceiling was the very best solution for me. Our finished ceiling peak with no the new boards was 7′-6″ and I didn’t want to make it as well substantially shorter with other solutions that I noticed.
See how other DIYers have put in a plank ceiling in the kitchen area and in the attic, and a reclaimed wood plank ceiling in a bedroom.
4. Start off 1st row.
Start off on the longest wall in the back again of the area, reverse of the doorway. I ran the boards the duration of the area, perpendicular to the doorway. Cut the boards as you go with a miter noticed.
Oriented the boards so the the tongue of the boards have been struggling with the entry of the area. I required to make sure that from the entry of the area you could not see into the gaps of the tongue and groove of the boards.
I utilized the DAP DYNAGRIP Adhesive to the back again of the board
Then made use of the pin nailer to maintain it in position on the ceiling when the adhesive dries. I nailed in to the edge of the tongue at and angle, to cover most of the nail heads. For the reason that I made use of a pin nailer most of the holes the place so little it didn’t even mater as well substantially that they the place displaying.
5. Offset the Finishes of the Boards
Offset the ends of the boards at the very least 4″ from the previous row. You want to keep away from lining up the ends on just about every row as substantially as you can. This will give you a nicer staggered appear.
six. Repeat the Course of action Until the Ceiling is Finished
Repeat installing the tongue and groove planks right up until you have included the ceiling. The forthcoming video will consist of how to evaluate and slash all-around the holes for your lights, so be sure to subscribe to our YouTube channel to see that!
For the last row of boards I ripped the boards to width with a desk noticed dependent on the remaining width I essential to end it off. I slash off the tongue end of the board. You also have to get rid of 50 % of the groove up against the ceiling in get to glue this piece in position.
After the last board is put in then you are carried out. We remaining the ceiling with whitewashed flat sheen appear and we really like it.
What do you consider? Let us know in the reviews underneath if a whitewashed knotty pine board ceiling is something you would like in your property. Be sure to share and pin for afterwards!
Additional Diy ceiling updates: