Do you have an outdated window that requires to be replaced? Right now I am going to present you how I am updating an outdated aluminum window and installing a new double pane vinyl window in our basement lavatory. Many thanks to DAP for sponsoring this put up, all thoughts are ours — see our comprehensive disclosure plan in this article.
Our Birch Home is an older home, so we’ve been undertaking a great deal of updates to modernize the place. From updating the mantel and fireplace, to installing new flooring and a new kitchen and pantry, to getting rid of the pink bathtub — it is been a couple of several years of assignments but it is coming collectively! (We’ve set in a whole lot of perform in the yard, much too!)
This venture is in our basement lavatory, which we’ve been functioning on for awhile now. The past point we showed you was introducing the cement board all over the lavatory for the new tile.
Prior to we get much too considerably a lot more into the lavatory remodel, it was a great time to change the outdated aluminum window with a new double pane vinyl window. The outdated window was set up in the 50’s and is not extremely strength successful.
The good thing is, our window is not above the vainness/sink location like this a person — but this sliding mirror was a intelligent option if we did have that issue!
Installing a Window in a Basement Rest room
What is the cost to change an outdated window?
$a hundred and twenty for the new vinyl Jeldwen window and DAP supplies to make it climate restricted.
How considerably time does it just take?
It took us about 3 hours from start out to complete which include
- taking away the outdated aluminum window
- cleansing the window place
- installing the new window
- caulking to make the window climate restricted
How to evaluate the for the new window
Measure the height and wide on the exterior and subtract one/4″ to an one/2″. That will give you the closing proportions of the window.
For this new lavatory window, I purchased a vinyl window with no fins on the sides simply because I was introducing wood trim all over it. It took about a 7 days or a lot more to decide up the window, simply because it was a custom made order.
Get our tips for selecting new windows in this article.
What You are going to Need: Changing an Old Window in a Basement Rest room
This put up incorporates affiliate one-way links. Study a lot more and read through our comprehensive disclosure policy here.
How to Remove an Old Window and Put in a New Window
one. Remove outdated current window.
I had to minimize out the frame with a metallic reciprocating saw blade. Immediately after earning the cuts, I employed the hammer to pry it all out.
If you have an outdated wood window and can remove it in a person piece, in this article are some thoughts for what to do with outdated windows.
two. Clean up and prep the window location totally free from dust and debris.
Remove any dust, dust and outdated caulk from the outdated window.
three. Dry healthy new window.
I created positive that the window I purchased healthy in the place. Phew! Measure two times, order at the time!
4. Insert wood trim.
Simply because this window is in the basement concrete wall, I included redwood trim. We like functioning with redwood simply because it is a tough wood that’s the natural way rot- and climate-resistant — we use it in pretty much all our outdoor assignments, from our deck to our new lifted backyard garden containers. (See redwood concrete bench, backyard garden arbor, and pergola, much too.)
I glued a redwood frame in place with DAP DynoGrip. I needed anything to conveniently to drill into to preserve the window in place.
4. Amount the window.
I employed a little degree to make positive it was degree in the opening. I was fortunate, simply because the wood frame that I created was just appropriate and I did not require to use shims to degree it.
six. Check window to make positive it opens conveniently.
Make positive you slide the window open and shut to verify that it operates just after it is degree.
7. Screw the new window to the wood frame.
I employed one one/2″ screws to connect the vinyl window to the wood frame. Just make positive the screw head is a flat head that doesn’t get in the way of the window opening and closing.
Then I covered the screw heads with the caps that appear with the window. It appears pleasant and can make the window observe simpler to preserve cleanse, much too.
six. Seal with foam.
I employed DAP Contact ‘N Foam to shut all the gaps of the window both equally on the within and exterior.
7. Seal with Caulk
Immediately after the foam dried I employed DAP Window Trim Caulk to seal off the exterior of the window to preserve the water out.
Relevant Looking at: How to Put in Craftsman Window Trim
Now I require to start out functioning on the tile to complete off this lavatory! We’re even now choosing on the finishes for this lavatory — we could do some exciting moroccan model fish scale tile like this, or some modern-day hexagon tile… lots of possibilities!
Keep tuned for a lot more lavatory remodel to appear — and you can see wherever this lavatory started out in this article and how we set up the cement board in this article.
Far more Diy window updates: